This post continues my series aimed at explaining the main elements of a contract. These elements are outlined on the attached infographic. My goal is to define the key elements of a contract and to offer some tips and cautions to avoid costly mistakes as you approach these essential documents in your day-to-day business operations.

First up: the preamble and recital sections. The preamble of a contract is the introductory paragraph that identifies the parties to the agreement. It is typically followed by paragraphs known as recitals (also called the background section). Sometimes, these recital paragraphs are labeled “Whereas”. Taken together, the preamble and the recitals tell the who, what, when, and why of the transaction. In other words, they should tell the reader who the parties to the agreement are, the date of the agreement, and what the parties hope to accomplish by entering into the agreement.

As with stories told in other settings, inaccuracies and ambiguities in the preamble and recitals of a contract can cause problems down the road. One of the underlying purposes of a contract is to set forth the agreement of the parties so that their expectations can be enforced by a court or other tribunal. An accurate and detailed introduction to the contract can educate the person who is charged with resolving the dispute as to who the parties are, why they entered into the contract, and what their expectations were at the time the agreement was entered into.

One of the most common mistakes in these preliminary sections of a contract is to incorrectly name the owner of the business as a party, rather than using the entity name. This mistake results in the owner being personally obligated as a party to the contract, which is clearly not the result an owner expects after taking the trouble to incorporate.

While it may be tempting to gloss over these preliminaries without questioning their accuracy, I highly recommend taking the time to carefully review this section in every contract to be sure the story it tells is true and complete. It could prevent costly conflicts later.

Stay tuned for Part 2 of this series, which will move to the next element on the infographic: offer, acceptance, and consideration.

It is not unusual for business owners such as manufacturers and their suppliers and consultants to enter into joint ownership in the pursuit of mutual business goals.  Those pursuing this strategy should consider that such entanglements can lead to costly future litigation should circumstances change and interests of the parties diverge. In a recent case, a dispute arose between owners of a custom manufacturing limited liability company in which AMM’s client (and a supplier to that same LLC) possessed 33 1/3% of the issued and outstanding ownership interests.   The firm’s client also owned 100% of the stock in a separate business entity which supplied materials to the jointly owned custom manufacturer. 

When the owners had a falling out, an issue arose with regard to the payment of outstanding invoices generated by the supplier for materials provided to the jointly owned custom manufacturer.  When a resolution could not be reached, AMM, on behalf of the supplier, commenced litigation.   During the litigation, the majority member of the jointly held custom manufacturer transferred all of the inventory and other assets to a newly formed entity, owned entirely by him, without the payment of consideration, that is to say, without compensating the supplier entity.  The transfer of assets left the jointly held entity with insufficient assets to meet its’ liabilities; including the liabilities to the supplier.   As a matter of strategy, the controlling member of the jointly owned entity allowed default judgment in favor of the supplier and against the jointly held custom manufacturer.  The newly created entity went about doing business utilizing the inventory transferred without regard to the liability to the supplier.

The transfers gave rise to new and additional claims under the recently adopted Uniform Fraudulent Conveyances Act and claims of breach of fiduciary duty; all of which had to be litigated while the newly formed company operated a separate business. Clearly, a small business owner can no longer simply set up shop as a new entity when things go bad and debt accumulates. However, the complexity of ownership structure and relationship between the various entities made judicial intervention very difficult.   In the end, the newly formed entity was forced to file a general assignment for the benefit of creditors; the majority owner lost his interest in all of the respective entities and eventually filed for personal bankruptcy. 

The above is just one of many “war stories” encountered in attempting to unwind jointly owned business enterprises.  Business owners and potential investors should think very carefully before engaging in shared ownership.  What may seem like a mutually beneficial relationship at the outset can be costly and challenging to undo if things go bad in the future.    

The take away for business owners and potential investors is to think very carefully before engaging in shared ownership.  What may seem like a mutually beneficial relationship at the outset can be costly and challenging to undo if things go bad in the future. 

As a business owner, you are routinely asked to “sign on the dotted line.” The document could be a purchase order, an equipment lease, or a bill of sale. Often, these documents are in fact contracts that impose obligations on the parties, even if they don’t say “Contract” or “Agreement” at the top of page one.  I can’t overstate the importance of knowing what you are signing – i.e., being able to recognize a contract when you see one, as well as understanding the components of a contract and how they impact your business. I often say “think before you sign; review before you renew.”

Over the years, I have worked with many business owners who discover a little too late that they have signed a document that does not align with their intentions and may have costly consequences. For this reason, and under the theory that knowledge is power,  I have put together the attached infographic to try to demystify and define the essential elements of a contract. In the coming weeks, I will be writing a series of informational blogs on each of the identified sections of this schematic to offer guidance for business owners as they approach the documents which are so essential to the health and profitability of their enterprise. 

There are many reasons why businesses sell.  Certainly, the lifecycle of a successful business is often longer than the founder or controlling shareholder’s desire to continue working.  In such circumstances, a business owner may wish to extract the reward for years of sweat equity by transitioning to a new ownership group.   In other situations, a strategic combination is necessary to fuel continued growth in scope of services or customer reach.  Sometimes, an entrepreneur must simply choose between a number of different projects such that divestiture of one opportunity becomes necessary. 

Whatever the reason, preparing the business for the sale process can both enhance the value of the transaction and make for a smooth transition.  A sophisticated buyer is loath to take on uncertainties, non-ordinary course liabilities or business practices which may give rise to same.  A potential seller is wise to get their “house” in order before going to market or even considering discussions with a potential buyer. 

Financial Reporting

Financial information is a primary focus of due diligence.  Many businesses do not commission audited financial statements on an annual basis.  For many more, the annual tax return stands alone as an indication of the value of the business.  However, tax returns prepared without an eye on sale often reflect information designed to reflect a reduced tax liability as opposed to demonstrating the value of a going concern.  A business owner is wise to consider the assistance of a qualified accounting firm to prepare corporate financial information in a light more suitable for transactional purposes.  The actual filing of all applicable returns is a must.

Human Relations & Employment Practices and Policies

Human relations matters are a potential land mine.  An employee handbook summarizing policies and procedures is essential.  If benefits plans are in place, compliance with all applicable laws will be required if a deal is to be consummated.  A current employee census and proof of citizenship or immigration status will be required.  Key employees should be subject to employment agreements with assignable restrictive covenants.  An acquiror will desire protection against an exodus of management.  

Customers and Business Partnerships

Customer relationships and key business agreements should be locked down.  An analysis of such agreements in advance with special attention to assignability or change in control provisions is necessary due diligence in any sale.  Disclosure to a client or customer may make for a difficult discussion, however, a buyer will want to ensure the continuation of the business relationships prior to commitment. Indemnification obligations and intellectual property rights are certain to be addressed to the extent integral to any customer relationships.

A well-constructed house sells more readily and for greater value than a leaky one on an unstable foundation.   Further, a buyer will often require representations and warranties as to the material issues summarized above such that, even after closing, a deficiency can be costly to a seller who thought the transaction was over and the profits safely secured. monetarily impactful. A seller is wise to identify and address deficiencies in advance of sale discussions both to maximize value and make for a smooth, efficient and cost effective transaction.       

Retailers, Importers, and brands need to immediately be sure there is no cotton from Turkmenistan in their supply chains.  The U.S. Customs and Border Protection (CBP) has finally announced it will turn away or seize and withhold any shipments of cotton originating in the Central Asian nation of Turkmenistan.  Affected importers will clearly experience a significant, and probably costly, disruption of production- related procurement.   The International Labor Rights Forum (ILRF) urged the U.S. to ban Turkmen cotton two years ago but was rejected until findings of state-enforced slave labor was documented after extensive investigation.

CBP was given the authority to ban tainted products like cotton from Turkmenistan when The Trade Facilitation and Trade Enforcement Act of 2015 (TFTEA) removed the “consumptive demand” exception to the United States Tariff Act of 1930, a commonly exploited loophole to the prohibition against importing products of forced labor. Prior to the new provision, CBP used the law only 39 times since 1930 to apprehend goods tainted at some point from creation to delivery by forced labor. Since the passage of TFTEA, CBP has issued four new Withhold Release Orders (each a WRO) on specific goods from China (soda ash, calcium chloride, and caustic soda from Tangshan Sanyou Group and its subsidiaries on March 29, 2016; potassium, potassium hydroxide, and potassium nitrate from Tangshan Sunfar Silicon Industries also on March 29, 2016; Stevia and its derivatives from Inner Mongolia Hengzheng Group Baoanzhao Agricultural and Trade LLC on May 20, 2016; and peeled garlic from Hangchange Fruits & Vegetable Products Co., Ltd. on September 16, 2016). 

A March 31, 2017 Executive Order establishing enhanced collection and enforcement of antidumping and countervailing duties and violations of trade and customs laws authorized the Secretary of Homeland Security, through the commissioner of CBP, to develop implementation plans and a strategy for interdiction and disposal of inadmissible goods and to develop prosecution practices to treat significant trade law violations as a high priority.

Although 2017 saw more antidumping and countervailing duty orders and intellectual property rights protection activity under TFTEA, there have been no published detentions prior to the ban of any shipments of Turkmen cotton, although CBP pledged to the U.S. Congress that more import bans under section 307 would be forthcoming.  Perhaps this is just the beginning of a long awaited CBP crack-down on forced labor imports to combat human rights abuses in global supply chains.

Goods Tainted by Forced Labor

Reprinted with permission from Business Law Today April 2018. 

The global fight against child labor and forced labor has been led for decades by the International Labor Organization (ILO). The ILO’s most recent estimate is that 25 million people around the world, including millions of children, are currently subjected to forced labor.  Under U.S. law, section 307 of the Tariff Act of 1930  prohibits the importation of merchandise mined, produced, or manufactured, wholly or in part, in any foreign country by convict, forced, or indentured labor. This law gave the U.S. Customs Service (now the U.S. Customs and Border Protection (CBP)) authority to seize commodities imported into the United States where forced labor was suspected to have been used anywhere in the supply chain.

The Tariff Act defines “forced labor” as “all work or service which is exacted from any person under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily.” Products of forced labor include goods that were produced by convicts and indentured laborers. The ILO defines forced or compulsory labor as service that involves coercion—either direct threats of violence or more subtle forms of compulsion under the menace of any penalty.  Goods made by child labor, defined as work that deprives children of their childhood, their potential, and their dignity and that is harmful to their physical and mental development,  are included in the forced-labor prohibition especially when combined with any form of indenture. Such tainted merchandise is subject to exclusion and/or seizure by the CBP, may lead to corporate criminal liability, and could even support prosecution of culpable employees individually.

The Trade Facilitation and Trade Enforcement Act of 2015 (TFTEA) removed the “consumptive demand” exception to the United States Tariff Act of 1930,  which was a commonly exploited loophole to the prohibition against importing products of forced labor. Prior to the new provision, CBP used the law only 39 times since 1930 to apprehend goods tainted at some point from creation to delivery by forced labor. Since the passage of TFTEA, CBP has issued four new Withhold Release Orders (each a WRO) on specific goods from China.  Although 2017 saw more antidumping and countervailing duty orders and intellectual property rights protection activity under TFTEA,  there have been no published detentions to date, although CBP has pledged to the U.S. Congress that more import bans under section 307 are forthcoming.

In the many years I have been working as outside counsel to closely held businesses, one of the frequent pitfalls leading to costly litigation and operational conflicts is the failure of shareholders to adequately document and formalize their expectations, especially as it relates to minority shareholders.  The first question I ask when contacted by a business owner who is dealing with shareholder conflicts is “What does your shareholders’ agreement say?”  Unfortunately, too often, the answer is “What shareholders’ agreement?”   

Many small businesses are formed by a group of people who share a collective belief at the time of formation.  There are often unwritten understandings as to the division of roles within the business.  Almost universally, the expectation is that all of these founding shareholders will devote ongoing resources to the business.  Conflicts arise when those expectations diverge, when one shareholder fails to perform within the business, or even when a shareholder exits the company.   
 
When conflict does arise, mechanisms for resolution can be limited, complex and expensive.  Certainly a transfer of a non-performing shareholder’s stock seems like a simple straightforward course of action.  However,   in the absence of an agreement providing for transfer upon specified events, the business has no absolute right to remove a shareholder or force a transfer of the share ownership interest.  Even a shareholder who has ceased to be actively involved in the business continues to enjoy all of the rights attendant to the ownership of the shares: the shareholder need not come to work, need not contribute capital, need not pursue business opportunity in the name of the company.  Employment may end, but the right to enjoy distribution of profits does not, as long as share ownership persists.  As most small businesses are organized as subchapter “s” corporations, profits must be distributed in accordance with share percentage. 

Ownership of stock gives rise to all of the rights provided by statute.  Minority shareholders enjoy the right to obtain information about the performance of the company, attend and vote at shareholders’ meetings, and receive distributions of profits derived from corporate operations.  Minority shareholders can be an impediment to stock transfers, anchors against change and obstacles to capital expenditures. Such situations are a constant bone of contention among owners of small businesses. 
 
Of course, the best solution is an agreement that accurately reflects the understandings of the shareholders at the time the shares are assigned, or the company is formed.  Such agreements can provide clearly defined roles within the business, mandatory transfer upon termination of employment, death or disability, valuation mechanisms and provisions restricting transfer.  Adopting an agreement, at minimum, provides a foundation for the business relationship, and may provide a roadmap in the event of disagreement.    

In the absence of an agreement, a dispute with a minority shareholder requires careful management. The majority must take care to avoid vesting a minority shareholder with breach of fiduciary duty claims or shareholder oppression.   Compliance with corporate formalities is imperative. While there is no guaranty of continuing employment for a minority shareholder (with exceptions), distributions or profits in accordance with ownership percentages is required if the company has elected “s” corporation treatment.  Certainly, majority and employed shareholders may receive compensation for services rendered, but an artificial manipulation of corporate profits would certainly be relevant to a minority shareholder oppression claim.  

Pennsylvania Business Corporations Law provides little relief to a majority shareholder who continues to run a profitable business without the assistance of his or her minority shareholders. The statute provides no right to extract a non-performing shareholder against his/her will at any price, and provides no absolute right of liquidation. Even the nuclear option of judicial corporate liquidation requires that the complaining shareholder allege irreparable harm to the company; an allegation which may be impossible if the business is successful as a result of the majority’s efforts.

Formation of an appropriate and workable shareholders’ agreement requires legal representation; as does management of divergent goals between shareholders.  Owners of s corporations with minority shareholders would be wise to review their governing documents and take proactive steps to safeguard the future value of their shares, and avoid crippling and costly litigation. Antheil Maslow and MacMinn business attorneys are highly experienced in such matters and leverage a team of professionals in differing disciplines to navigate these complex waters.       

Earlier this year, amendments to Pennsylvania’s statutes governing partnerships and limited liability companies (often referred to as unincorporated entities or alternative entities) went into effect. I recently blogged about the “transferable interest” concept adopted by the Act. Today, in Part 2 of this series, I highlight another significant change brought about by Act 170: the clarification of the fiduciary and other duties owed in the context of an unincorporated entity. In general, there are three basic duties:

• Duty of loyalty: generally, a duty to avoid self-dealing, competing and usurping company or partnership opportunities
• Duty of care: a duty to refrain from gross negligence and recklessness
• Duty of good faith and fair dealing: a duty to deal fairly and consistently with the terms of the parties’ agreement and the purpose of the entity

In a general partnership, each partner owes the above duties to each of the other partners and to the entity.

In a limited partnership: (a) the general partner owes each of these duties to the limited partners and to the partnership; and (b) the limited partners owe only a duty of good faith and fair dealing to each other.

In a manager-managed LLC: (a) the manager owes these duties to the members and to the entity; and (b) the members owe a duty of good faith and fair dealing to each other. In a member-managed LLC, the members owe these duties to each other and the company.

Some of these duties may be modified by agreement of the parties. In their operating or partnership agreement, the parties may modify, but not eliminate, the duty of loyalty and the duty of care, as long as the modification is not “manifestly unreasonable.” This standard is not defined and is left to the courts to interpret, but in general the agreement cannot convert the relationship into a strictly arm’s length relationship. The duty of good faith and fair dealing may not be modified or removed, but the owners’ agreement can identify the standards by which this duty will be measured.

The Pennsylvania General Assembly, with significant input from the Pennsylvania Bar Association’s Business Law Section, recently passed Act 170, which overhauls the statutes governing partnerships and limited liability companies (often referred to as unincorporated entities or alternative entities). This Act brings these statutes up to date with the uniform laws on which they are based and is now in effect for all new and all existing unincorporated entities. These comprehensive amendments provide default rules for governance and other matters that fill the gaps in the absence of an operating agreement or partnership agreement (or the absence of applicable provisions in those documents). Accordingly, it is important for owners of partnerships and LLCs to review their governing documents and be sure they have a clear understanding of how these new rules apply to them. Owners should work with counsel to draft provisions to vary these default rules if that is the desired outcome.    

One significant change brought about by the Act is the recognition that equity interests in unincorporated entities are bifurcated into governance rights (including consent, management, and information rights) and economic rights (i.e., the right to receive distributions). The amendments adopt a concept called a “transferable interest”, which is an interest in the partnership or LLC that includes only economic rights. The holder of a transferable interest has no governance rights; he or she has only the right to receive distributions from the entity (but not the right to demand or sue for distributions). The transferable interest approach honors the “pick your partner” principle, which assures owners of a business entity that they will be able to choose the co-owners of the enterprise. Under the revised statute, the only interest that can be conveyed to a non-member is a transferable interest, unless the operating agreement provides otherwise or the other owners expressly agree. Thus, a creditor foreclosing on a member’s equity interest or a person seeking to attach a spouse’s equity interest in a divorce proceeding can take only a transferable interest. This limitation on the rights of non-members affords owners important protections from assertions of control by outsiders which may not be in the best interest of the entity or its members. The exception to this rule is that a creditor foreclosing on an equity interest in a single-member LLC will take the full membership interest (governance and economic rights). The rationale for this exception is that because there is only one member, the “pick your partner” rationale does not apply to limit the rights of the lender.

Or
Avoiding Bad Press, Brand Impairment and Costly Litigation

Reprinted with permission from the February 28th edition of the The Legal Intelligencer © 2017 ALM Media Properties, LLC. All rights reserved.Further duplication without permission is prohibited

A significant amount of press surrounded the US Department of Justice (DOJ) one year trial pilot program on April 5, 2016 and  the earlier September 29, 2015 “Yates Memo”, instructing companies to self-disclose possible violations of the Foreign Corrupt Practices Act (FCPA) and fully cooperate with the DOJ.  What has not been as broadly made known is that, a few days later, the U.S. Customs and Border Protection (CBP) establish a Trade Enforcement Task Force within its Office of Trade to focus on issues related to enforcement of antidumping and countervailing duty laws and interdiction of imported products using forced labor. 

Antidumping and countervailing duties are historic tariffs imposed on foreign imports priced below fair market value to ensure a level playing field for domestic producers.  The interdiction of products using forced labor stems from The Trade Facilitation and Trade Enforcement Act of 2015(TFTEA), enacted in February 2016.  TFTEA eliminates an earlier “consumptive demand” exemption, meaning that goods made with indentured, child, or other forced labor are no longer allowed in the US just to meet US demand.  With this change, CBP will no longer be legally required to weigh demand considerations when processing information concerning forced labor.  CBP will be updating its regulations to clarify the TFTEA amendment but, since March 10, 2016, CBP started training personnel and has executed several withhold/release orders related to goods made by convict or forced labor using a Department of Labor (DOL) list of foreign-made products for which the DOL “has a reasonable basis to believe might have been mined, produced or manufactured” by forced or indentured labor. The CBP has also established within its Office of Trade a Trade Remedy Law Enforcement Division and seems intent on taking action.